If something seems different, let us know and share your info to help other users. Once removed, you can remove seat belt reel or seat belt height adjuster if needed and replace. The C-pillar is located behind the rear door. The only tools needed are a flat head screwdriver for the light assemblies and a T-25 Torx screwdriver for the one screw that holds the piece in place. I don't even get how it came off. Once detached, slide seat belt through B-pillar trim and remove from vehicle. Then just break free from the two clips, and reverse the process to replace.
Performance Gain: Access components behind B-pillar trim, seat belt reel and seat belt height adjuster. July 28, 2016 Followup from the Pelican Staff: The top piece slides up and attaches, then clips hold the bottom section. I replaced the C-Pillar trim pieces on both sides, the interior trim between the side rear glass and the rear windshield. I dont know what trim clips I need or how to install the bottom and top. Replace any broken trim panel clips and work with care so as not to damage the trim panel finish.
I tried to put it back but it won't do. If any of the entrance strip trim clips remain in door sill when removing, lever them out and slide back into door entrance strip. The sizes of the nuts and bolts we give may be different from what you have, so be prepared with different size sockets and wrenches. Some owners try to use an adhesive to fix the problem, but the outer fabric layer is very thin and the glue comes through. Protect your eyes, hands and body from fluids, dust and debris while working on your vehicle. E46 models are equipped with curtain airbags above the doors. Give The Pelican Parts parts specialists a call at 1-888-280-7799.
They can move around to any location on the entrance strip, so be sure to properly align the clip with corresponding hole in body. Do not use sharp metal tools when prying an interior pillar panel away from the roof liner. Please join the Roadfly Facebook Group where members will be more than happy to answer your questions and provide help. I muscled it out to begin with so maybe I'm missing a step. That being said, you always have the option of replacing them. Basically, it separates the front door and the rear door and it also houses hinges if you have a back door. Need to buy parts for this project? Installation is easy but, due to the fact you must remove the lower seat belt bolt, may require special tools.
Be careful not to break your brackets. If your b-pillar cover has been damaged, you might want to replace it to restore the look of your vehicle and its safety in the event of a rollover. This cover simply snaps on without hassle and will instantly improve the look of your car. To start viewing messages, select the forum that you want to visit from the selection below. Comments and Suggestions: justo Comments: where can i order the clips. Recycle parts, packaging and fluids when possible. That would explain why it is sticking out at the bottom.
You can get away with removing only the front door entrance trim, and sliding B-pillar out of the rear door entrance trim when removing. The car recently ticked over. Be sure to replace any broken trim clips or plastic rivets. All you have to do is tuck in the cable. Protect your eyes, hands and body from fluids, dust and debris while working on your vehicle. Once detached the panel will pull off. Recycle parts, packaging and fluids when possible.
Install the A-pillar fastener cover. Comments and Suggestions: Art Comments: I ran all new wiring to my rear doors for new speakers I plan on amping in the future. The B-pillar is located between the front and rear doors. June 25, 2016 Followup from the Pelican Staff: Which cover? I want to fit a wire in to place a microphone in the light fitting as designed. If you are working with the electrical system, disconnect the battery before beginning. By continuing to browse our site you agree to our use of data and cookies.